Radiolink RC6GS V3 7 Channels RC Transmitter and R7FG Gyro Receiver, 2.4Ghz 600M

  
- With pseudo random FHSS algorithm and the Latest ARM M4 transmitter chip, the Radiolink RC6GS V3 2.4ghz RC Radio Transmitter has extraordinary anti-interference ability, and distance up to 1900 feet (600 meters). Even multiple RC6GS V3 RC remotes are working in the same area, there is No Any Interference! With R7FG Gyro Receivers, Real-time information telemetry to radio screen, like the vehicle's battery voltage, RSSI, etc. Upgrade to 30 models storage and each model can be set up alarming and named separately. Add Timer function for competition training.

- CH3-CH7 can be customized to VR, three-way switch, and tact switch. CH5-CH6 can be used to FPV Head Tracking, the SWA can be used for Cruise Control mode, a perfect choice for crawler. Any two channels can be mixed control and each channel can be customized according to your DIY needs!

It also support one switch to ON/OFF mix control. Dual Rate Function support one switch to change different servo travel! - Radiolink RC6GS V3 7Channel RC Radio Transmitter is suitable for most RC models on the market! Compatible with: RC rock crawler, monster truck, drifting, gas powered, nitro, on/off-road RC car, tank and boat etc. RC6GS V3 RC Remote Control Transmitter Features. Pseudo random algorithm FHSS communication technology makes RC6GS V3 control distance up to 1900 feet (600 meters) and supports multiple RC6GS V3 are working in the same area without any interference. Mix control can be programmed with any two channels and each mix control can be turned on by one switch. That's friendly for two-engine vehicles, such as tanks, boats, 4 wheel steering car.

Real-time signal strength, RX battery voltage and vehicle battery voltage(telemetry of maximum 8S)can be displayed on the radio screen. (Only support works with radiolink R7FG or R8F receiver). R7FG built-in Gyro can keep the vehicle running in a straight line, and Gyro sensitivity can be adjusted by transmitter, which fits for drifting and on-road cars.

Anti-polarity connect protection technology to keep your transmitter safety even if you Accidentally connect the wrong positive and negative poles. Perfect RC Controller and Receiver Kit. Package comes with R7FG Receiver and 1 adjustable neck lanyard. R7FG receiver with built-in Gyro, support high voltage servo(3-12V DC). CH3-CH7 can be customized to three-way switch, rotary switch and tact switch.

CH5-CH6 can be used to FPV Head Tracking, the tact switch can be used for cruise control mode, a good idea for crawler. All channels' fail-safe values can be set as you need. 30 groups of model can be stored and named, each model can set the low voltage alarm separately. It is applicable for most types of cars and boat, like RC rock crawler, twin-engine tank, monster truck, drifting, hot wheel, Baja, off-road, on road, sailboats, trimaran, bait boat, lifebuoy and etc.

One Switch to Activate the Mixing. Any two channels can be mixed control and support one switch to activate, it's easy to ON/OFF mix control according to different situation. Setup Method For Crawler: CH1-rudder, CH2-throttle, CH3-transfer case, CH4-shift gear, CH5-front locker, CH6 -rear, and CH7-capstan. The timer function of the RC6GS V3 can be used for training and racing. It allows you to grasp the lap and complete track results in time to help you train yourself before the race.

One key to switch D/R and EPA. RC6GS V3 support one key to switch the different servo range of dual rate and EPA after setting up. It is convenient to adapt to the needs of different models, terrains and usage habits.

DSC port is default the simulator function, can be set as FPV head track (3-axis or 2-axis track can be selected), or TBS Crossfire.