2.4G Wireless ISM DMX512 XLR Receiver Transmitter LED Stage PAR Party Light B2K5

  

Dmx 512 Controller Rechargeable Battery Wireless Receiver 2.4G Ism Dmx512 Wireless Transmitter Receiver For Stage Light Effect. This rechargeable receiver is used to stage light.

It transmits standard DMX512 protocol data (generated by console). With it, you can control stage light in wireless way.

It can work about 9 hours after battery being fully charged. Support color jumping in 126 channels.

High anti-jamming ability ensure stable performance. User can use 7 groups individual wireless net without any interfering in the same place. Input voltage: 5V DC 500mA Working frequency section: 2.4G ISM Communication distance: 300M (visible distance) Working frequency section: 2.4G ISM, 126 channels Receiver sensitivity: -94dBm ID code group quantity: 7 Battery: 16340 battery 3.7V 650mA Power adapter: US standard, UK standard, EU standard, AU standard (optional) Cable length: 177cm / 5.8ft Item size: 2.6 11.3cm / 1 4.4 in (D H) Item weight: 81g / 2.8oz Package size: 14.8 10.8 4cm / 5.8 4.3 1.6in (L W H) Package weight: 192g / 6.8oz. ID code and LED color corresponding relationship: 1: RED 2: GREEN 3: RED+GREEN 4: BLUE 5: RED+BLUE 6: GREEN+BLUE 7: RED+GREEN+BLUE 1 Press momentary switch above the side led indicator to indicate ID setting. 2 Press again to set IC, to the color ID desired, adding 1 each time you press the switch will advance the color ID code. 3 Working condition: LED constant lit up: No DMX or wireless signal. Green LED flash: Receiving 4 RF frequency 2.400 - 2.525G, total 126 channels, it's searching automatically. 5 ID Code "1-7" groups ID code, press'KEY' for setting, it only can work under same ID code of transmitter and receiver. Power on DMX512 wireless received board first and then following to power up the transmitted board. Press "Key" button to set same ID value of transmitted board and received board.

Please use different ID value if you need use more than 1 group wireless universals at same time in same place. The red LED flashes when transmitter transmits DMX data by no interfered frequency section, then receiver changes communicated frequency section. Green LED flashes until received same ID value, the more DMX data, the faster the LED flashes. Packaged including: (Depends on your order). 1T = 1pc transmitter +1pc power adapter 1R= 1pc receiver + 1pc power adapter 1T and 1R= 1pc transmitter + 1pc receiver +2pcs power adapters 1T and 2R= 1pc transmitter + 2pcs receivers+3pcs power adapters 1T and 3R= 1pc transmitter + 3pcs receivers+4pcs power adapters 1T and 4R= 1pc transmitter + 4pcs receivers+5pcs power adapters 1T and 5R= 1pc transmitter + 5pcs receivers+6pcs power adapters 1T and 6R= 1pc transmitter + 6pcs receivers+7pcs power adapters 1T and 7R= 1pc transmitter + 7pcs receivers+8pcs power adapters 2T and 4R= 2pc transmitter + 4pcs receivers+6pcs power adapters 2T and 5R= 2pc transmitter + 5pcs receivers+7pcs power adapters 2T and 6R= 2pc transmitter + 6pcs receivers+8pcs power adapters.

2T and 7R= 2pc transmitter + 7pcs receivers+9pcs power adapters. 2T and 8R= 2pc transmitter + 8pcs receivers+10pcs power adapters.