Sennheiser Evolution EW300 IEM G2 In Ear Monitor Transmitter A 518-554 SR300IEM

  

Sennheiser EW300IEM G2 In-Ear Monitor Transmitter A-band 518-554 MHz SR300IEM. Sennheiser Wireless In-Ear Monitor Stereo Transmitter A-band 518-554 MHz. 1440 possible frequencies, stereo or mono operation, impeccable audio, comprehensive display and settings, XLR balanced inputs, half-rack sized chassis, selectable input sensitivity. Compatible with all generations of Sennheiser Evolution IEM bodypack receivers that operate on the A band only.

Also compatible with 3200 series A band IEM bodypack receivers and 2000 series Aw band IEM bodypack receivers. Will not work with receivers that operate on the A1, B, B2, C, D, E, G, or GB bands. XLR inputs accept balanced or unbalanced audio. This device transmits radio frequencies and is therefore subject to FCC regulation. Used, tested, works perfectly, in with some cosmetic paint flaws on the face as shown (see pics)..

This unit is the lower-input-sensitivity version with the latest NET. 201 firmware installed (see details below). Transmitter, telescoping antenna, NT2-1-120 power supply. Requires compatible Sennheiser A-band receiver(s) for use.

Further Info: Transmitter is compatible with Sennheiser Evolution Wireless In-Ear Monitor bodypack receivers (1st Generation, G2, G3, G4) only if they operate on Sennheiser's A band. Also compatible with 3200 series IEM A band receivers and 2000 series IEM Aw band receivers. EW300IEM systems may also be used for high quality wireless stereo audio transmission in applications where audio wiring is impossible or impractical. For applications requiring mono audio, the audio transmitted by this unit may also be received by any Evolution Wireless A, A2, or Aw+ band wireless mic receiver EK100, EK500, EM100, EM300, EM500, etc. This transmitter has the lower of the two input sensitivities that were available on these units, It's rated input level is +20dBu max for peak deviation, which is the spec reflected in the owners manual link above.

201 firmware updates them to the +20dBu sensitivity. Feel free to ask me any questions you have concerning the the different sensitivity versions of these units or compatibility with your existing gear. Contact me for a quote. If you receive an item from me that you feel does not meet these criteria, please contact me.