FLYSKY Noble NB4+ Surface Radio with Receiver FGR4B

  
FLYSKY Noble NB4+ Surface Radio w/ Receiver FGR4B. FLYSKY Noble NB4+ Surface Radio. This product uses the 2.4GHz Third Generation AFHDS 3 protocol.

The Noble NB4+ transmitter and FGr4B receiver constatute a system, compatible with model cars, boats and other models. And it also supports the USB simulator function (Default enabled). AFHDS 3 (third-generation automatic frequency hopping digital system) is a newly developed digital wireless system.

It is compatible with single antenna bidirectional real-time data packet transmission and data stream transmission. With the advantages that come with the WS2A wireless system and the new 2.4GHz chip, the system can dynamically set: number of channels, channel resolution, range, anti-interference requirements and latency to meet the needs of different users. Single Antenna Bidirectional Real-time Data Transmission. The receiver can receive data from the transmitter and the transmitter can receive data from the receiver, this includes data from sensors, such as temperature and speed and support the i-BUS. This gives more control over the aircraft and constant information on its current status.

The independent uncorrected data transmission module is built into RF system; it can send many different types of data including flight control data. Depending on hardware, certification, the amount of data to be transmitted, anti-interference, latency and distance requirements, the system intelligently adapts the corresponding RF configuration to meet the requirements of the user. This systems bandwidth ranges from 2.402GHz to 2.480GHz.

This band is divided in 140 channels. Each transmitter hops between 16 channels (32 for Japanese and Korean versions) in order to reduce interference from other transmitters. Each transmitter and receiver has it's own unique ID.

Once the transmitter and receiver have been paired, they will only communicate with each other, preventing other systems accidentally connecting to or interfering with the systems operation. The system is built using highly sensitive low power consumption components, maintaining high receiver sensitivity, while consuming as little as one tenth the power of a standard FM system, dramatically extending battery.

The Noble NB4+ has 2 batteries, one located in the handle and one in the removeable base. Line up the base so that the transmitter handle has a slight over hang on the back.

Carefully insert the base contacts into the hole in the bottom of the handle. Hold the handle firmly and pull the battery backwards. The beginner mode is suitable for entry level players to improve the safety of operations by limiting the amount of throttle servo. This function is hidden by default.

You need to enable it manually. Go to the [Custom Main Menu] menu under the [MODEL] menu bar, and select the [Beginner] check box. After selection, this function is displayed on the menu interface. When this function is enabled, the icon will change to. Assign SW controls to enable/disable the beginner function.

Noble NB4+ supports three function modes: Trainer, Student and H Track. Transmitters set to Trainer or H Track Mode accept external signals to control the model, that is, the trainer interface or head tracker interface has the ability to recognize external PPM signal input.

Transmitters set to Student Mode only output PPM signals and do not recognize the input signals. Two transmitters (one for Trainer mode and one for Student mode) can be connected via a double-ended Type-C cable to realize the coach function. One transmitter (H Track mode) can be connected to the headset via head tracker cable to realize the head tracker function. This chapter includes specifications for Noble NB4+ transmitter and FGr4B Receiver. FGr4B and other AFHDS 3 receivers. 3.5-inch 320480 full dot matrix color IPS touch screen. 1S(4.2V)4300mAh Lithium Polymer Battery+3450mA 18650 Battery. >300m (Ground distance without interference). Sorry, our items are NOT available for pick-up. No additional information at this time. T-Rex 550L Bearing Block (Upper) - Trex 550L Dominator. XLPower Nimbus Nitro / Nimbus 550 / Nimbus 550 V2 / Specter Nitro M3x8 Socket He. YX PD100 Main Frame Assembly. SAB Sticker Raw 580 Orange. Any kits that have been partially or fully built, items that have been soldered, batteries that have been soldered or charged, or products that have been cut, punctured, modified or otherwise, will not be accepted as a return. Aircraft that have been "test flown" will not be accepted as a return item. If the item(s) received has been opened, uséd or damaged, no return options will be offered.

For DJI brand, please contact directly DJI service center. Return Processing Requiring Product Testing - For any item requiring testing, as the testing process via our in house technicians will require the necessary time to problem solve your return. Our goal is to isolate whatever trouble your item(s) may be experiencing, and as soon as we have the available information to proceed, you will be updated regarding this.

This number aids us in the ability to properly handle your return.