10CH Radio Transmitter and Receiver FS-iA10B 2.4G RC Controller for Airplane

  

10CH Radio Transmitter and Receiver FS-iA10B RC Controller for Airplane Helicopter FPV Drone RC Quadcopter Fly in The vast Sky Mode-2. 1Multi-channel Hopping Frequency --- This system bandwidth ranges from to This is divided in 135 channels.

Each transmitter hops between 16 channels (English version) in order to reduce interference from other transmitters. 2 Unique ID Recgnition System --- Each transmitter and receiver has it's own unique ID. Once the transmitter and receiver have been paired, they will only communicate with each other, preventing other systems accidentally connecting to or interfering with the systems operation.

3 Bidirectional communication - capable of sending and receiving data, the transmitter can display the voltage value data of the receiver FS-iA10B. 4 Omni-directional Gain Antenna --- The high efficiency Omni-directional high gain antenna cuts down on interference, while using less power and maintaining a strong reliable connection.

Fly in the vast Sky. 5 Low Power Consumption --- The system is built using highly sensitive low power consumption components, maintaining high receiver sensitivity, while consuming as little as one tenth the power of a standard FM system, dramatically extending battery life. 10-Channel RC Transmitter and FS-iA10B Receiver The and FS-iA10B connected, then you don't need to make new connections when you receive them. There is no need to connect the "bind plug" when it is working. If bonding with other FS-iA10B receivers, you can do the following. 1, Connect the included binding cable to the receiver's B/VCC port. 2, Plug the DC power supply into other ports, the positive and negative poles cannot be wrongly connected.

3, Keep pressing the "BIND KEY", and then turn on the transmitter to enter the binding mode. 4, The transmitter will display the RX voltage, that means the binding is successful. 5, Remove binding wire, Check the operation of the servos. If something doesn't work as expected, start this process from the beginning.

> Flysky is a transmitter built for fixed-wing / glider / helicopter models. Can also support RC Quadcopter/Car/Boat, even if these icons are not in the menu. It features the AFHDS2A and AFHDS protocol, support for up to 10 Channels through DIY upgrades, and is compatible with many ST RC Simulators via USB.