FLYSKY FSi6 6CH 2.4GHz Radio System RC Transmitter Controller withFSiA6 Receive

  

FLYSKY FS-i6 6CH 2.4GHz Radio System RC Transmitter Controller w/FS-iA6 Receiver for RC Helicopter Plane Quadcopter Glide (Mode_2). 1Reliable, interference free 2.4GHz AFHDS 2A signal operation. Associated with a High Sensitivity Receiver, This Radio System Guarantees a Jamming Free Long Range Radio Transmission Each Transmitter Has a Unique Id, When Binding with a Receiver, The Receiver Saves That Unique ID and Can Accepts Only Data From The Unique Transmitter. 3 Each transmitter and receiver has it's own unique ID.

Once the transmitter and receiver have been paired, they will only communicate with each other, preventing other systems accidentally connecting to or interfering with the systems operation. 4 The system is built using highly sensitive low power consumption components, maintaining high receiver sensitivity, while consuming as little as one tenth the power of a standard FM system, dramatically extending battery life. 5 Quick and extremely stable in performance. FS i6 and ia6 receivers have completed the code matching, no need to code again.

Please note:the FLYSKY FS-I6 is Left hand throttle(Mode 2), the throttle stick will not return to the center up and down. If you are using another transmitter or receiver, follow the steps below to bind to the B/VCC port on the receiver. 1, Connect the supplied bind cable to the B/VCC port on the receiver. 2, Insert power into any other port.

3, Hold the "BIND KEY" while powering on the transmitter to enter bind mode. 4, Remove the power and bind cable from the receiver. Then connect the power cable to the B/VCC port. 5, Check the servos' operation. If anything does not work as expected, restart this procedure from the beginning. RF Range: 2.40-2.48GHz. RF Power: Less Than 20dBm. 2.4ghz System: AFHDS 2A and AFHDS.

Low Voltage Warning: less than 4.2V. DSC Port: PS2;Output:PPM. ANT length: 26mm2(dual antenna). Package Size: 23.5x21.2x10.6cm. Power: 6V, 4AA Battery(Not included).

Display mode: Transflective STN positive type, 12864 dot matrix VA7339mm, white backlight. Frequency Range :2.4-2.48 GHz. Transmitting Power: not more than 20dBm. 2.4G modes: Automatic frequency second generation digital systems Encoding: GFSK. Input Power :4.0-6.5V DC.

Dimensions: 40.4x21.1x7.35 mm. Usage: Suitable for RC Airplane/glider/helicopter. Compatible Transmitter: Flysky FS-i6, FS-I6X, FS-I6S. Any product you return must be in the same condition you received it and in the original packaging. We usually respond within 24 hours on weekdays. Thank you for shopping at our store.