- Home
- Brand
- Design
- Frequency Band
- Item Weight
- Model
- 3pv (16)
- 4pm (8)
- Blx14 / Pga31 (10)
- Blx24 / Sm58 (10)
- Blx288 / Beta58a (16)
- Dmx512 (8)
- Dx5 (16)
- Ew 100 G3 (7)
- Ft11 (11)
- Ft11+pr13 (8)
- Mars 400s (11)
- Mars 400s Pro (10)
- Qlxd4 / Beta58a (7)
- Rode Wireless Go (16)
- Shure Ulxd4 (7)
- Spektrum Ar10400t (8)
- Spm6775 (8)
- Swift 800 (8)
- Ucr411a (8)
- Wpm-200 (41)
- ... (4290)
- Type
- Adapter (14)
- Base Station (22)
- Base Station Radio (7)
- Condenser Microphone (13)
- Dmx Controller (24)
- Dmx Receiver (15)
- Ham Radio Receiver (9)
- Handheld (13)
- Hdmi Extender (12)
- Image Transmission (14)
- In Ear Monitor (30)
- Intercom (10)
- Lavalier (75)
- Microphone Receiver (55)
- Radio Equipment (27)
- Radio Receiver (9)
- Receiver (108)
- Transmitter (202)
- Transmitter Receiver (10)
- Wireless (13)
- ... (3842)
Donner DMX512 Transmitter Receiver Wireless Lighting Controller Built-in Battery
Donner DMX512 Transmitter Receiver Wireless Lighting Controller Built-in Battery. Latest design wireless DMX512 receiver have a built-in rechargeable battery and the battery is renewable. After a full battery charge time about 2 hours, sustainable work about 8 hours. Users also can use the product while charging. About battery charge indicator light:the green light flashing when the battery charging, and green light normally on a full charge.
Press momentary switch above the side led indicator to indicate ID setting. Press again to set IC, to the color ID desired, adding 1 each time you press the switch will advance the color ID code. Working condition:LED constant lit up:No DMX or wireless signal. Red LED flash:Transmitting Green LED flash:receiving. RF frequency 2.400 - 2.525G, total 126 channels, it's searching automatically.ID Code "1-7" groups ID code, press "KEY" for setting, it only can work under same ID code of transmitter and receiver. Power on DMX512 wireless received board first and then following to power up the transmitted boards. Press "Key" button to set same ID value of transmitted board and received board. Please use different ID value if you need use more than 1 group wireless universals at same time in same place.
The red LED flashes when transmitter transmits DMX data by no interfered frequency section, then receiver changes communicated frequency section. Green LED flash till received corrected same ID value, LED flash more fast once DMX data more fast. 2.4G wireless DMX512 R/T. 7 groups ID code settable, User can use 7 groups individual wireless net without any interfere.
Input voltage:5VDC 500mA MIN. Communication distance:400M (visible distance). Max transmitting power rate:20dBm.
Ambient Relative Humidity:5 to 95% (non-condensing). Automatic Reboot Trigger:Built-in WDT (watchdog timer). We believe communication can result in a happier ending before you leave a red or gray feedback. Your satisfaction is the most important thing we pursue. Please be patient to wait for our reply, because we are in different countries, there is a time difference between us. Thank you for your understanding and we appreciate your business! PS :our working time (Beijing Time Zone).The item "Donner DMX512 Transmitter Receiver Wireless Lighting Controller Built-in Battery" is in sale since Monday, April 29, 2019. This item is in the category "Musical Instruments & Gear\Stage Lighting & Effects\Stage Lighting Controllers". The seller is "donner-usa" and is located in Charlotte, North Carolina.
This item can be shipped to United States.
- Brand: Donner
- MPN: Does Not Apply