Work frequency section: 2.4G ISM, 126 channels, frequency section. Max transmitting power rate: 20dBm. Operating temperature: -40 85 Celsius. Storage Temperature: -65 150 Celsius.
Ambient Relative Humidity: 5 to 95% (non-condensing). Automatic Reboot Trigger: Built-in WDT (watchdog timer).
ID code and LED color corresponding relationship. Press momentary switch above the side led indicator to indicate ID setting. Press again to set IC, to the color ID desired, adding 1 each time you press the switch will advance the color IDcode. LED constant lit up No DMX or wireless signal. RF frequency 2.400 - 2.525G, total 126 channels, it's searching automatically.
ID Code "1-7" groups ID code, press'KEY' for setting, it only can work under same ID code of transmitter and receiver. Power on DMX512 wireless received board first and then following to power up the transmitted board.Press the "Key" button to set the same ID value of the transmitted board and received board. Please use a different ID value if you need to use more than 1 group of wireless universals at the same time in the same place. The red LED flashes when the transmitter transmits DMX data by no interfered frequency section, then the receiver changes communicated frequency section.
Green LED flashes until received same ID value, the more DMX data, the faster the LED flashes. DMX512 Receiver Transmitter (According variation you choose). This item is in the category "Musical Instruments & Gear\Stage Lighting & Effects\Stage Lighting Controllers".The seller is "gridlock-box" and is located in this country: CN. This item can be shipped worldwide.