DMX512 Wireless 5 Receiver+1 Transmitter 2.4G LED Stage Lighting Effects Control

  
Healthcare, Lab & Life Science. DMX512 Wireless 5 Receiver+1 Transmitter 2.4G LED Stage Lighting Effects Control. This DMX512 all need to connect Power Adapter Plug to work , NOT Battery type!!

5 Receiver with 5 adapter. Do you like holding party but is annoyed by winding wire?

This wireless transmitter and the receivers will help you to get rid of the trouble. Just plug the transmitter into stage lamp console, plug the receivers into stage lamp and you will be free to control stage lamp without wire.

DMX512 wireless receiver/transmitter transmits standard DMX512 protocol data generated by. This product adopts a 2.4G ISM frequency section. Modulate, communication design; 126 channels jumping frequency automatically, high anti. 2.4G wireless DMX512 R/T. 126 channels jumping frequency automatically, high anti-jamming ability.

5 groups ID code settable, User can use 5 groups individual wireless net without any interfere. Each other in the same place... Input voltage:5VDC 500mA MIN. Communication distance: 400M (visible distance).

Work frequency section: 2.4G ISM, 126 channels. Max transmitting power rate:20dBm.

ID code and LED color corresponding relationship. Press momentary switch above the side led indicator to indicate ID setting.

Press again to set IC. To the color ID desired, adding 1 each time you press the switch will. Advance the color ID code. No DMX or wireless signal. RF frequency 2.400 - 2.525G. It only can work under same ID code of. Power on DMX512 wireless received board first and then following to power up the. Button to set same ID value of transmitted board and received board. Use different ID value if you need use more than 1 group wireless universals at same time in.

The red LED flashes when transmitter transmits DMX data by no interfered frequency. Section, then receiver changes communicated frequency section.

Received corrected same ID value, LED flash more fast once DMX data more fast. Please note some DMX fixtures need to be placed into slave mode for proper DMX control. In the master mode they will send a DMX signal out the xlr jacks causing the auto scan. Transmitter/receivers to go into a transmitter mode due to the dmx signal being present. This unit is for Indoor use only. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately.

If it's non-workdays, please kindly be patient and wait till Monday. The item "DMX512 Wireless 5 Receiver+1 Transmitter 2.4G LED Stage Lighting Effects Control" is in sale since Thursday, October 17, 2019.

This item is in the category "Musical Instruments & Gear\Stage Lighting & Effects\Stage Lighting Controllers". The seller is "honestdentalshop" and is located in Rowland Heights, California. This item can be shipped to United States.

• Shipping notice: Can not ship to Puerto Rico/Alaska/Hawaii
• Brand: Unbranded
• MPN: Does Not Apply
• Work frequency section: 2.4G ISM,126 channels.frequency section
• Dmx Control: Yes
• Communication distance: 400M (visible distance)