DMX Stage Wireless 3Pin Male Transmitter +8 Rechargeable Female Receiver control

  

DMX Stage Wireless 3Pin Male Transmitter +8 Rechargeable Female Receiver These wireless transmitters and rechargeable receivers are used for stage light. With them, you can control stage light in wireless way. Features : - Transmit standard DMX512 protocol data (generated by console) in wireless way.

No time delay when signal data is transmitting. Signal data is real time and reliably. The transmitter adopts a 2.4G ISM frequency section. The receiver can work about 9 hours after battery being fully charged. Support color jumping in 126 channels.

High anti-jamming ability ensure stable performance. User can use 7 groups individual wireless net without any interfering in the same place. (Tricolor LED displaying indicators) Specifications Transmitter: - 2.4G wireless DMX512 R/T - Input voltage: 5VDC 500mA MIN - Receive Sensitivity: -94dBm - Max transmitting power rate: 20dBm - DMX connector: 3pin male - Communication distance: 400M (visible distance) - Work frequency section: 2.4G ISM, 126 channels. Frequency section - Item color: black - Power adapter standard: US - Material: zinc alloy + plastic - Item size: 21 2.5 2.5cm /8.26 0.98 0.98in (L W H) - Package size: 16.5 10 4cm / 6.5 3.9 1.6in (L W H) - Package weight: 180g / 6.36oz Receiver: Input voltage: 5V DC 500mA Working frequency section: 2.4G ISM Communication distance: 300M (visible distance) Working frequency section: 2.4G ISM, 126 channels Receiver sensitivity: -94dBm ID code group quantity: 7 Battery: 16340 battery 3.7V 650mA Power adapter standard: US Cable length: 177cm / 5.8ft Item size: 2.6 11.3cm / 1 4.4 in (D H) Item weight: 81g / 2.8oz Package size: 16.5 10 4cm / 6.5 3.9 1.6in (L W H) Package weight: 192g / 6.8oz Operating manual: ID code and LED color corresponding relationship: 1: RED 2: GREEN 3: RED+GREEN 4: BLUE 5: RED+BLUE 6: GREEN+BLUE 7: RED+GREEN+BLUE 1.

Press momentary switch above the side led indicator to indicate ID setting. Press again to set IC, to the color ID desired, adding 1 each time you press the switch will advance the color ID code.

Working condition: LED constant lit up: No DMX or wireless signal. Green LED flash: Receiving 4 RF frequency 2.400 - 2.525G, total 126 channels, it' s searching automatically. ID Code "1-7" groups ID code, press'KEY' for setting, it only can work under same ID code of transmitter and receiver. (Same LED Color) Establishing Communication: 1. Power on DMX512 wireless received board first and then following to power up the transmitted board.

Press "Key" button to set same ID value of transmitted board and received board. Please use different ID value if you need use more than 1 group wireless universals at same time in same place.

The red LED flashes when transmitter transmits DMX data by no interfered frequency section, then receiver changes communicated frequency section. Green LED flashes until received same ID value, the more DMX data, the faster the LED flashes. Package included: - 1 DMX wireless transmitter - 8 DMX wireless receiver - 9 Power adapter - 9 User manual (English). Because transit time is highly depended and provided by Postal Service. The item "DMX Stage Wireless 3Pin Male Transmitter +8 Rechargeable Female Receiver control" is in sale since Thursday, October 26, 2017.

This item is in the category "Musical Instruments & Gear\Stage Lighting & Effects\Stage Lighting Controllers". The seller is "overseaoutlet" and is located in Walton, Kentucky. This item can be shipped to United States.

• Brand: Unbranded
• MPN: Does Not Apply