AT10II 12 Channels RC Transmitter and Receiver R12DS 2.4Ghz Radio Remote NEW USA

  

AT10II 12 Channels RC Transmitter and Receiver R12DS 2.4Ghz Radio Remote NEW USA. 3.74 x 7.09 x 8.66 inches.

Excellent Anti-interference--DSSS&FHSS communication technology and 7dBi high gain antenna make AT10II transmitter with stable transmission signal and the control range is up to 2.5 miles(4km) in the air. Real-time Information--Airplane voltage monitor on AT10II screen when paired with PRM-01(package included). Key Features--12 channels, Battery Voltage Telemetry, RSSI telemetry, Dual/Triple Rates, Throttle Lock, Fail-safe Setting, End Point Adjustment(EPA), Switch Customized, Channels Mix Control, etc. User-Friendly Interface: support basic menu and advanced menu for different user needs and the user interface is quite intuitive and easy to navigate. No need for any radio setting to bind the transmitter with receivers. Safety Remind: Signal Strength Indicator (RSSI) Alerts, low voltage alarm, failsafe protection. DD sounds and words alarming display on the 3.5 LCD screen to remind you when you are in noisy surroundings. Switches User-defined: With 3 VR switches, 3 three-way position switches, 4 two-way position switches, and 1 reset trainer switch.

All 12 channels can be customized to any switch. Adapts to a Wide Range of Airplanes: compatible with receiver R12DS, R12DSM, R12DSE, R9DS, R6DS, and R6DSM. 15 models of storage and quicks to switch models: helicopter, quadcopter, fixed wing, glider, cars, BoxBot, and boats. AT10II 12 Channel Airplane Transmitter.

Low Latency (3ms Fast Response). Voltage Telemetry on Radio Screen (PRM-01). RSSI, Low Voltage Fail Safe Alert Setting etc. Dual/Triple Rate, EXPO, EPA, Throttle Cut, Mix Control etc. Wired/Wireless Training, RC Simulator/Crossfire Support.

Joystick Mode Change (Mode 1 & Mode 2 & dual-stick back to center). RC Models SelectionGlider, Helicopter, Quad, Fixed Wing, Car, etc.

Frequently Asked Questions and User Manual are at the bottom of this page "Product guides and documents". Real-time airplane voltage monitor on AT10II screen when paired with voltage telemetry module PRM-01(package includes).

To telemetry flight information on the radio's screen like battery voltage, speed, altitude, RSSI, yaw roll and more, AT10II should be equipped with a. Module and flight controller APM, Pixhawk, Mini Pix, Turbo Pix. Easy to understand graph view, 5-12 channels can be programmed to any advanced setting.

An Airbrake can be programmed by using pre-programmed mixes. Multi-servo elevator mixing for Flying Wings or V-Shaped tail models. Low RSSI, low voltage, and throttle position alarm, with DD sounds and words remind you on outdoor readable LCD screen. Each channel travel can be real-time displayed on the radio screen, press EXIT from the home page to this page. Support white or black screen background change, and backlight brightness is adjustable.

Left & Right Hand Modify. For different use applications, it can change the mode 2 from mode 1 or dual-stick back to the center. Note: you need to calibrate the joysticks after changing the modes.

It supports wired/wireless training function, and AT10II compatible with the majority of aircraft simulator software like Realflight, PhoenixRC, FreeRider, etc. AT10II radio is easily updated to the latest firmware. Simply connect the transmitter to the PC with a USB cable for updating. Not supported updating firmware with an Apple Mac computer. Works with a Variety of Radiolink Receivers.

R12DS, R12DSM, R12DSE, R9DS, R6DS, R6DSM, or TBS receiver when works with crossfire module. Adapts to Most Types of RC Models. 15 models data storage, and it supports models, like Fixed Wing, Airplane, Multirotor, Helicopter, Mower, Cars, and Baitboats. To work with Drone, we suggest going to mini size. To use the simulator, your receiver should switch to. (R6DS/R6DSM/R12DSE/R12DSM receiver has PPM signal). Support PWM/SBUS signal output, 3.6-12V support. Quick press the bind button to switch signal, SBUS used for the flight controller. Real-time airplane voltage monitor on AT10II's screen when paired with voltage telemetry module PRM-01, which comes in pacakge. Model voltage alarming can be customized. With 7dBi high gain antenna, cuts down interference, that's ensure control range up to 4KM (2.5 Miles). Lower signal noise with a channel Bandwidth of 5.0 MHz. RF power output is over 100mW for a stable response. AT10II with reverse polarity protection circuit, do not worry about it damage even you insert wrong polarity.

Battery box dimensions: 115(L)x32(W)x30.5(H)mm (4.5''x1.25''x1.2''). 2.4GHz ISM (2400MHz - 2483.5MHz). 7.415.0V (2S, 3S Lipos, 8AA are acceptable). 320×480 Pixel, 3.5 inch outdoor readable LCD. Radiolink R12DS, R12DSE, R12DSM, R9DS, R6DS, R6DSM.

We offer the best prices around on high quality products. Our E-store includes media such as books, movies, music and games while offering electronics, toys, sporting apparel, clothing, tools, general home, garden items and more. We are always working hard to ensure your package arrives as soon as possible. We do not accept P. Please provide a physical address.

We try our very best to make sure every customer is completely satisfied. If there's a problem, message us! We're happy to help.