2.4Ghz Wireless Audio Transmitter and Receiver (1 TX+2 RX), 2 Receivers for Two

  
YMOO wireless transmitter receiver kit support RCA input and 3.5mm output, can easily connect with your TV, DVD, transfering audio wirelessly to TWO powerful active speakers, soundbars. Transmitter is for your TV/PC, Receiver for your speaker. Wireless transmitter and receiver will automatically turn on and automatically connect. YMOO wireless transmitter and receiver use 2.4GHz technology, within antennas can reach 320 feet (100m without any wall or floor) and 60 feet (15-20m) across one or two wall. TWO receivers make it get???????? You can connect with two speakers at the same time. Enjoy silk like fluente and DUAL powerful sound music throughout the house without worrying about audio loss or signal drop-off. Both wireless transmitter and receivers are equiped with 3.5mm and RCA male to male Jack, ?????????????? You can connect them with any speakers with 3.5mm aux and RCA input. Supported by 2.4GHz transmission technology, YMOO wireless audio transmitter and receiver delay is less than 20ms. Streaming high-quality audio up to 24bit, eaqual to CD quality, even better.

Transimission sound is clear, stable, noise-free, and audio synchronization. Strong anti-interference technology no matter at home or office, you can enjoy excellent audio quality. Abosolutely the dream solution for wallmount speaker or backyard speaker cables messy. A wireless audio transmitter and receiver provide you the best solution to connect your TV / PC / MP3 /speaker and your home stereo wirelessly. Dual RCA cables are not included.

Audio decoding, bring you true HiFi listening experience. Does YMOO RT5066 can work with any kind of passive subwoofer/rear speaker/passive speaker?

We don't suggest using for subwoofer because passive subwoofer/rear speaker/passive speaker needs high power. There will have noise or distortion when using to them. How do I put the RT5066 transmitter and receiver into pairing mode?

Just power on all three. LED will stays on when all paired successfully. How RT5066 to work with amplifier? RT5066 Receiver --- amplifier---passive speaker(perfect). RT5066 Receiver --- Active speakervolume will be low.

Need to change audio from TV or amplifier to solve. How to reset to pair? For example, one receiver is paired, other do not. Open the transmitter through screw back.

Press the key inside or left side. When receiver LED will stays on blue. That means it has paired successfully. Why the distance can not reach to 100m? The distance will be effected by obstacle.

Wifi router can effect the distance. Please stay away from it.

100m wireless distance without any wall or floor. 10-15m cross one or two wall. Zero cross three walls/ one floor. How to solve pairing case.

The way to pairing transmitter and receiver. Normally, when both transmitter and receivers charged, they will pair automatically. LED of them will stays on blue. If transmitter do not pair, please press the button of the transmitter untill LED off. And then press until on, they will pair automatically. If receivers do not pair, please press the button of both transmitter and the falshing receiver untill LED off. If it still do not work, please open the back of transmitter as video shown. The video showcases the product in use. The video guides you through product setup. The video compares multiple products. The video shows the product being unpacked. 3 in 1 Wireless Audio Transmitter and Receiver.