2.4G wireless DMX512 R. Input voltage: 5VDC 500mA MIN. Max transmitting power rate: 20dBm. Communication distance: 800M (visible distance). Work frequency section: 2.4G ISM, 126 channels.Material: zinc alloy + plastic. ID code and LED color corresponding relationship. Press momentary switch above the side led indicator to indicate ID setting. Press again to set IC, to the color ID desired, adding 1 each time you press the. Switch will advance the color IDcode.
LED constant lit up: No DMX or wireless signal. 4 RF frequency 2.400 - 2.525G, total 126 channels, its searching automatically. ID Code 1-7 groups ID code, press KEY for setting, it only can work under same. ID code of transmitter and receiver.Power on DMX512 wireless received board first and then following to power up the. Press Key button to set same ID value of transmitted board and received board. Please use different ID value if you need use more than 1 group wireless universals.
At same time in same place. The red LED flashes when transmitter transmits DMX data by no interfered. Frequency section, then receiver changes communicated frequency section. LED flashes until received same ID value, the more DMX data, the faster the LED flashes. The item "DMX512 Wireless Lighting Receiver Transmitter 2.4G Communication Controller" is in sale since Friday, July 5, 2019.This item is in the category "Musical Instruments & Gear\Stage Lighting & Effects\Stage Lighting Controllers". The seller is "jingnazjn_9" and is located in china. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia.
Load Power: 300m